No products in the cart.
$299.95
The OPTOGATE (PB-06) The PB-06 is an extended version of the well-known Optogate for conference systems. The combination of the well-known optical gate and a push button allow for a wide range of possible uses. The device can be fixed with 2 screws.
| Dimensions PB-06: | 40 mm long x 25 mm high x 12 mm wide |
| Connectors: | 2 x 50 cm cable with xlr connectors |
| Case construction: | 1,2 mm steel, powder coated |
| Distance | Adjustable between 15 – 120 cm (depending of the type of reflection surface) |
| Angle | + / – 10 ° |
| Switching noise: | Immeasurable |
| Frequency responses | 0 Hz – 30kHz, – 3 dB at 150 Ohm mic impedance |
| Signal noise ratio: | -114 dB / -122 dB, mic on / off with a 150 Ohm mic. |
| Distortion | < 0,05 % at 100mV |
| Delaytime mic on: | < 0,2 Sec |
| Delaytime mic off: | ca. 1 Sec |
| Attenuation “mic on”: | 0 dB |
| Attenuation “mic off”: | 42 dB at 150 Ohm mic impedance |
| Usuable mic. types: | All type of dynamic – and phantom powered mics. up to 10 mA current consumption |
| Maximum input level: | 3 dB (1,1V) |
| Operating temperature: | 0 – 55 Grad Celsius |
| Background light range: | 0 – 20000 Lux daylight und 0 – 12000 Lux electric bulblight |
| Distance measurement: | Active infrared reflection principle with daylight filter. |
| Power: | 24-48 V Phantompower |
| Current consumption: | ca. 3.7 mA |
Reviews
There are no reviews yet.